Raspberry Pi OS • Re: How to set HDMI screen blank time to 120 seconds for...
Code: mousepad ~/.config/labwc/autostartchange the timeStatistics: Posted by kerry_s — Wed Dec 18, 2024 7:57 pm
View ArticleRaspberry Pi Connect • Re: Web API for Connect?
We can get lots of hardware data by using Ubuntu's system app Neofetch (or a version installed on Raspberry OS).I installed that on Raspberry Pi OS on my RPi5 from...
View ArticleClik here to view.
Troubleshooting • Re: Pi 5 no longer boots from USB SSD [SOLVED]
Thank you again for your help. Through this process of plugging and unplugging, I believe that I figured out what was going wrong, and it relates to the cable. Despite the external portable SSD being...
View ArticleRaspberry Pi Connect • Testing your firewall...
I've been working on understanding the firewalls of the world (at least IPV6 compatible ones for the moment). Specifically I am trying to understand what the maximum/minimum/average time is required...
View ArticleDevice Tree • Re: MCP23017 overlay error -EIO: can't write IOCON 32
So I wait until @aBUGSworstnightmare has the device in front of him thanks for the effort and helpno need to wait for me for any feedback. This is out of curiosity for me, but not high prio. I will...
View ArticleAdvanced users • Active Cooler at 100% in Network Install with 2024-12-19...
I see in the release notes for the 2024-12-19 bootloader EEPROM image for BCM2712-based Pis:* Disable fan PWM GPIO between RP1 init and fan probe Drive fan PWM GPIO high during early boot to disable...
View ArticleCompute Module • Re: CM4 VL805 firmware
I am running the 6.6-28 kernelIs there a specific way to flash the vl805 firmware to the bootloaderrpi-eeprom-update utility specifies '-u' flag however seems like i may be missing somethingCode: sudo...
View ArticleTroubleshooting • Re: Booting from network, only when needed?
I do not use a local storage device for such case so the only way the Pi (4 in my case) comes online is via network boot. I kept the https://www.raspberrypi.com/documentati ... BOOT_ORDER as is. See...
View ArticleTroubleshooting • Re: Very strange /etc/fstab on Raspberry Pi Zero on first boot
I don't like the look of all those I/O errors at the top of the first picture. Could be a bad SD card.That'd be my guess too. It's either gone read only or something is very wrong in the mapping...
View ArticleBeginners • Re: Raspberry OS SMB - exFAT vs ext4
If the conclusion is not to use ext4, isn't ExFAT universal enough anyway? Supported by Linux, Windows, MacOS, Android as per the OP's requirements.Maybe but FAT is more mature and will work on things...
View ArticleRaspberry Pi Connect • Re: Testing your firewall...
Instructions may need a minor modification (.c missing)? Code: pi@pi5-8GB:~/udpping $ gcc -o udp_test_client udp_test_clientgcc: fatal error: input file ‘udp_test_client’ is the same as output...
View ArticleAdvanced users • Re: How to (need advise) increase the size of the boot...
I can maybe help you, but I'm out atm.....Statistics: Posted by procount — Thu Dec 19, 2024 8:03 pm
View ArticleGeneral • Re: How many LEDs can a Pico Power
WS2812 pixels (aka NeoPixels by AdaFruit) are connected in series. Control is by pixel number, counting from zero as for a list. WS2812 strips have 3 inputs: +5V, Data and Ground. Power is connected...
View ArticleMicroPython • Re: Pico2W & micropython
In my case the message got a bit lost in the quoting and other discussion. Anyway, I concur that initial testing has been successful.Statistics: Posted by dBerriff — Fri Dec 20, 2024 7:32 pm
View ArticleSDK • Re: Building an HTTP web server with Pico SDK
I think I'm on the right path since my compiler only throws errors for configuration stuff:This is my mbedtls_config.h:Code: /* Workaround for some mbedtls source files using INT_MAX without including...
View ArticleCamera board • Re: OV9281 Arducam
Doh, I was looking at the wrong output file!There is something a little squiffy.I have got a black image when looking directly at a light and it asked for exposure 1/355s and ISO 400, but fine for...
View ArticleClik here to view.
Beginners • Re: RasPI imager, does not see the NVMe SSD to image OpenPlotter...
Thank you.sudo apt update and sudo apt upgrade seems to have solved the issue Statistics: Posted by SteveQuolls — Fri Dec 20, 2024 7:53 pm
View ArticleClik here to view.
Beginners • Re: Raspberry Pi SSD
Thank you sudo apt update and sudo apt upgrade seems to have solved the issue Statistics: Posted by SteveQuolls — Fri Dec 20, 2024 7:56 pm
View ArticleTroubleshooting • Re: Distorted image on a display with res. 1920x1280
OK, I have now my system running booting from a re-imaged SSD. I have lost the applications I had installed, but I can rebuild that.Still have the initial problem with that weird resolution 1920x1280....
View ArticleAdvanced users • Re: is the /rootfs/boot is still needed ?
You ruined initramfs (re)generation capability now. Maybe it is not used, then you won't noticed.And where is the bootFAT (partitotion 1) mounted?Statistics: Posted by redvli — Fri Dec 20, 2024 8:20 pm
View Article