I am trying to set up a headless Pi 5. I used the Pi Imager to load the recommended OS (Raspberry Pi OS 64-bit) onto a 128GB SD card. After loading the card into the Pi and plugging in the Pi, nothing seems to happen, other than getting 3 long green flashes and 1 short flash. The documentation suggests "SPI EEPROM error - Pi 4".
I have tried following the advice from viewtopic.php?t=243549 which suggests removing the SD card to check if the EEPROM has been corrupted. The same flashing sequence appears with or without the SD card in place.
I'm new to this and after reading a lot of other posts, I haven't found anything that seems to describe the issue I am seeing or what to try next.
I have tried following the advice from viewtopic.php?t=243549 which suggests removing the SD card to check if the EEPROM has been corrupted. The same flashing sequence appears with or without the SD card in place.
I'm new to this and after reading a lot of other posts, I haven't found anything that seems to describe the issue I am seeing or what to try next.
Statistics: Posted by ngeldelroos — Thu Mar 21, 2024 1:50 am