I have tried all those with both DSI0 and DSI1 as well as V1 and V2 of the screen and I wasn’t successful. The screens work fine with the RPI5. I have updated the OS, all possible updates. And I’m running a clean install. Any ideas?That is my understanding, yes.@6by9: can you please confirm below is correct understanding:
When using CAM/DISP0 interface (silkscreen label J5) below has to be added to config.txtWhen using CAM/DISP1 interface (silkscreen label J16) the jumpers on J6 need to be mounted and below has to be added to config.txtCode:
dtoverlay=vc4-kms-dsi-ili9881-7inch,dsi0Confusion may come from the fact that J6 on CM4IO has to be mounted when using CAM/DISP0 but now is required for CAM/DISP1.Code:
dtoverlay=vc4-kms-dsi-ili9881-7inch
Statistics: Posted by sg666tri — Mon Dec 16, 2024 7:23 pm